Armable (127)

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 6.2 cm x 5.8 cm x 5.2 cm The IMPERIAL AT-AT model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. All-Terrain Armored Transport Vehicles, or AT-ATs for short. They first appeared in Empire Strikes Back. AT-ATs are 50 feet tall and resemble giant, four-legged monsters. The head serves as a control center and mount for the walker's weapons. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 4.5cm x 6.8cm x 8.1cm Material: Metal Recommended age range: 14+ The STAR WARS AT-ST model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. While not as imposing as its larger AT-AT walker cousin, the AT-ST served as a significant addition to the Imperial side of the battlefields in the Galactic Civil War. The two-man craft is lightly armed with chin-mounted laser cannons and side-mounted weapons pods. The two-legged transport, nicknamed by many as the scout walker, serves as a reconnaissance and patrol vehicle, often flanking approaching AT-ATs and picking off infantry sneaking between the larger walkers. The Imperials used AT-STs in both the Battle of Hoth and the Battle of Endor. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 3 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 6.4cm x 5.7cm x 12.1cm The IRON MAN model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with three square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. Wounded, captured, and forced to build a weapon by his enemies, billionaire industrialist Tony Stark created an advanced suit of armor to save his life and escape captivity. Now, with a new outlook on life, Tony uses his money and intelligence to make the world a better, safer place as Iron Man. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 10.9 cm x 8.2 cm x 4.5 cm The KLINGON VORCHA model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The Vor'Cha-class strike cruiser is a powerful ship that debuted in the Next Generation episode "Reunion." Its combat function is said to be comparable to that of a heavy cruiser. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 7.5cm x 6.5cm x 6.2cm Material: Metal Recommended age range: 14+ The WHITE HOUSE model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. Located at 1600 Pennsylvania Avenue NW in Washington, DC, the White House is the official residence and principal workplace of the President of the United States. It was designed by Irish-born James Hoban and built between 1792 and 1800 using white-painted Aquia sandstone. During the War of 1812, British troops burned it in retaliation for an earlier burning of Canadian government buildings in York, Ontario, by the United States. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 12.7cm x 6.4cm x 11.1cm Material: Metal Recommended age range: 14+ The IMPERIAL SHUTTLE model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. An elegant example that stands out from the typical brutal Imperial engineering, the Lambda-class shuttle is a multipurpose transport used in the Imperial Starfleet. The Empire put the ferry into service for both cargo and passenger service. Even the Empire's elite, such as Darth Vader and Emperor Palpatine, used these shuttles. It has three wings: a stationary central blade and two articulated flanking wings. When in flight, the side wings are deployed for greater stabilization. Upon landing, the wings fold, shrinking the silhouette of the craft. The well-armed vessel has two forward-facing twin laser cannons, two wing-mounted twin cannons, and one rear-facing twin laser cannon. It is equipped with a hyperdrive. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 10.9cm x 9.2cm x 3cm Material: Metal Recommended age range: 14+ The DRAGONFLY model kit It's an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with a 4-inch square sheet of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. It has large, multifaceted eyes, two pairs of strong, transparent wings, and an elongated body. Dragonflies are among the fastest flying insects in the world, capable of reaching speeds of over 40 miles per hour. They are important predators that eat mosquitoes and other small insects such as flies, bees, ants and wasps. They are usually found around swamps, lakes, ponds, streams, and wetlands. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 11cm x 2.3cm x 3cm Material: Metal Recommended age range: 14+ The STEAM LOCOMOTIVE model kit It's an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. The steam locomotive is a train that produces its energy from a steam engine. The train must carry its water in the locomotive itself or in a car attached behind the locomotive. Steam is produced by burning coal, wood or oil. Steam engines dominated rail transport from the early 19th century to the mid-20th century. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 3 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 7.6 cm x 3.2 cm x 12.1 cm The WAR MACHINE model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with three 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. James Rhodes was a U.S. Navy pilot. He dons a modified version of the Iron Man armor given to him by Tony Stark and adopts the nickname War Machine. The War Machine armor is designed for combat. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.5 cm x 2.5 cm x 5.1 cm The MJOLNIR model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. It is the favorite weapon of the Norse God Thor. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 6cm x 6cm x 5.5cm Material: Metal Recommended age range: 14+ The APOLLO LUNAR MODULE model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. It was a two-part spacecraft used to transport a crew of two from lunar orbit to the lunar surface and back. The descent stage served as a launch pad for the ascent stage and also housed the landing gear, engines, and fuel needed for landing. Six of these spacecraft successfully landed on the Moon between 1969 and 1972. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 5.2cm x 4.5cm x 10cm Material: Metal Recommended age range: 14+ The WINDMILL model kit is an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. The term windmill derives from its use in grinding grain. The first windmills appeared in Europe during the 12th century in northwestern France and southern England. At their peak, some windmills were able to produce more than 1.5 megawatts of power, a level not achieved again until 1988. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 7.5cm x 3.3cm x 9.1cm Material: Metal Recommended age range: 14+ The Ferris Wheel model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The first modern Ferris wheel was designed and built by George Washington Ferris as a landmark for the 1893 World's Columbian Exposition in Chicago. Later, the term Ferris wheel was used generically for all these structures. As of 2012, the Singapore Flyer at 541 feet tall is the tallest wheel in the world. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 1 Leaf Difficulty Level: Easy Dimensions: 3cm x 2.9cm x 11.8cm Material: Metal Recommended age range: 14+ The WASHINGTON MONUMENT model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The Washington Monument, located in Washington, DC, was built to commemorate General George Washington, the first president of the United States. When completed in 1848, it was the tallest stone structure in the world until the Eiffel Tower in Paris was completed in 1889. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item condition: New Code: FMW 184 Number of Sheets: 3 Sheets Difficulty Level: Challenging Dimensions: 13cm x 4.6cm x 3.5cm The Motor Grader model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with three 4-inch square sheets of steel; simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. Cat® motor graders have become the industry standard in operational efficiency and overall productivity. The motor grader is designed to help you build and maintain the haul roads needed to support maximum efficiency in large mining operations. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 7.8cm x 5.1cm x 8.8cm Material: Metal Recommended age range: 14+ The SLAVE I model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The deadly ship was famous for its association with Jango Fett, a Mandalorian-armored bounty hunter. Fett filled the ship with weapons, from laser cannons and missile launchers to seismic charges. After Jango's death, Boba Fett refitted the ship and made it his own. A generation after his father's death, the distinctive ship was still the last thing the fugitives wanted to see on their scanners. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 6.7cm x 5.1cm x 10.2cm Recommended age range: 14+ The LONDON EYE FERRIS WHEEL model kit is an incredibly detailed etched model that is great fun and satisfying to put together. It starts with two square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. It is a giant Ferris wheel on the south bank of the River Thames in London. Also known as the Millennium Wheel, its official name was originally the British Airways London Eye, then the Merlin Entertainments London Eye, between January 2011 and August 2014, the EDF Energy London Eye and is now called the London Eye. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 3 Sheets Difficulty Level: Expert Dimensions: 8.2cm x 4.2cm x 3.5cm Material: Metal Recommended age range: 14+ The PARTHENON model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. It is a temple located on the Acropolis of Athens in Greece and dedicated to the maiden goddess Athena, whom the people of Athens considered their patron deity. Construction began in 447 BC when the Athenian Empire was at the height of its power and was completed in 438 BC. The Parthenon is the most recognizable enduring symbol of ancient Greece, Athenian democracy, and Western civilization. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 4 Sheets Difficulty Level: Challenging Dimensions: Oil Tanker: 12.2cm x 2.3cm x 3cm, Offshore Oil Platform: 4.1cm x 4.1cm x 8.3cm Material: Metal The Offshore Oil Rig & Oil Tanker Metal Model Kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. Offshore oil platform: A large structure with facilities for drilling wells (optionally), extracting and processing oil and natural gas, or temporarily storing the product until it can be brought to shore for refining and marketing. Oil tanker: A merchant vessel designed for the bulk transport of petroleum. There are two basic types of tankers: crude oil tankers and product tankers. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 6cm x 2.9cm x 9.5cm Material: Metal Recommended age range: 14+ The 30 Rockefeller Plaza model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. It was known as the RCA Building until 1988 and is now known as the GE Building. It is also nicknamed 30 Rock and is famous for being the headquarters of the NBC television network. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 13.7cm x 2.3cm x 5cm Material: Metal Recommended age range: 14+ The BROOKLYN BRIDGE model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. The Brooklyn Bridge is located in New York City and is one of the oldest suspension bridges in the United States. Completed in 1883, it connects the boroughs of Manhattan and Brooklyn across the East River. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 1 Leaf Difficulty Level: Easy Dimensions: 15cm x 0.8cm x 4.5cm Material: Metal Recommended age range: 14+ The San Francisco Golden Gate Bridge model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The Golden Gate is an art deco suspension bridge that spans the San Francisco Bay and is one of the city's most enduring symbols. Its construction arose from the need to get from San Francisco to Marin and the ferry traffic in the San Francisco Bay had become too heavy. Construction of the Golden Gate Bridge began in 1933 and was completed in 1937. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 6.1cm x 3cm x 6cm Material: Metal Recommended age range: 14+ The BRANDENBURG GATE model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. The Brandenburg Gate is the only remaining gate through which Berlin was entered. It was commissioned by King William II of Prussia as a symbol of peace. The design is based on the gateway to the Acropolis in Athens. Above the gate is the Quadriga, a chariot drawn by four horses driven by Victoria, the Roman goddess of victory. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 9cm x 4.5cm x 5.8cm Material: Metal Recommended age range: 14+ The APOLLO LUNAR ROVER model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. It was affectionately known as the moon buggy. It was used on the Moon in the last three missions of the US Apollo program (15, 16, 17) during 1971 and 1972. Powered by just two silver oxide batteries, Apollo 17 was able to drive for 35.74 km (22.21 mi) across the surface of the Moon. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED