Buildable Stainless Steel Models (82)

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7cm x 4cm x 4cm It is a simple open vehicle with two very large drive wheels on an axle below and slightly behind a single seat with the engine in front of the driver and two steerable wheels below the engine compartment. This basic design has remained unchanged for many years. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 10.9cm x 9.2cm x 3cm Material: Metal Recommended age range: 14+ The DRAGONFLY model kit It's an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with a 4-inch square sheet of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. It has large, multifaceted eyes, two pairs of strong, transparent wings, and an elongated body. Dragonflies are among the fastest flying insects in the world, capable of reaching speeds of over 40 miles per hour. They are important predators that eat mosquitoes and other small insects such as flies, bees, ants and wasps. They are usually found around swamps, lakes, ponds, streams, and wetlands. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 3 Sheets Difficulty Level: Challenging Dimensions: 10 cm x 4.2 cm x 4.8 cm The Western Star Tract Model Kit It's an incredibly detailed etched model, which is very fun and satisfying to put together. It starts with three 4-inch square sheets of steel and ends in a 3D model, Simply use the easy-to-follow instructions included with the sheet to remove the pieces, fold the tabs, and connect them at the attachment points. No glue or soldering is required. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item condition: New Code: F MW183 Manufacturer: Fascinations Number of Sheets: 2 Sheets Difficulty Level: Challenge Dimensions: 9.2cm x 3.3cm x 1.5cm The Metal Earth Wheel Loader model kit is an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel; simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. Specifically designed to handle all jobs on your jobsite, from material handling and truck loading to general construction and warehousing. This machine is specifically designed to be the perfect machine for your daily tasks. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.5 cm x 2.5 cm x 5.1 cm The MJOLNIR model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. It is the favorite weapon of the Norse God Thor. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 1 Leaf Difficulty Level: Moderate Dimensions: 3.8cm x 3.8cm x 8.9cm Material: Metal Recommended age range: 14+ The LEANING TOWER OF PISA model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. The Leaning Tower of Pisa is the bell tower, or freestanding campanile, of the city of Pisa, Italy, known worldwide for its involuntary tilt to one side. It is located behind the Cathedral and is the third oldest structure in Pisa's Cathedral Square (Piazza del Duomo) after the Cathedral and the Baptistery. The tower's tilt began during construction, caused by an inadequate foundation on soil too soft on one side to adequately support the structure's weight. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 12cm x 8.2cm x 5.2cm Material: Metal Recommended age range: 14+ The SCORPION model kit It's an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. This predatory arachnid has eight legs and is easily recognized by a pair of grasping claws and a narrow, segmented tail that is often carried in a characteristic forward curve over its back, and ends with a venomous stinger. Scorpions can grow up to 20 cm. Their venom has a fearsome reputation, but only about 25 of the nearly 1,500 species are known to have venom capable of killing a human. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item condition: New Code: FMW 184 Number of Sheets: 3 Sheets Difficulty Level: Challenging Dimensions: 13cm x 4.6cm x 3.5cm The Motor Grader model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with three 4-inch square sheets of steel; simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. Cat® motor graders have become the industry standard in operational efficiency and overall productivity. The motor grader is designed to help you build and maintain the haul roads needed to support maximum efficiency in large mining operations. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LATEST UNITS WORLDWIDE Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 15.25cm x 4.3cm x 10.65cm Box dimensions : 13.5cm x 1.5cm x 22cm Weight with box: 120g Recommended age range: 14+ The QUEEN ANNE'S REVENGE SHIP model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with two square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. Queen Anne's Revenge was the name of the flagship of the English pirate known as Blackbeard. He used it for less than a year, but it was an effective tool in his prize-taking. In 1718, Blackbeard ran his ship aground in Beaufort Inlet, Carteret County, North Carolina, in the present-day United States. In late 1996, Intersal, a private contractor working for the state of North Carolina on marine recovery, discovered the remains of a ship that was likely the Queen Anne's Revenge. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 1 Leaf Difficulty Level: Easy Dimensions: 3.2cm x 3cm x 10cm Material: Metal Recommended age range: 14+ The EMPIRE STATE BUILDING model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. The Empire State Building is the tallest building in New York City. This 102-story building rises 1,250 feet above the city at the intersection of Fifth Avenue and West 34th Street. Its name is derived from New York's nickname, the Empire State. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 4.5 cm x 5.3 cm x 9.5 cm The MEGATRON model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. He is the founder of the Decepticon uprising and its most well-known and feared leader. Megatron has lost battles, but he has never been truly defeated. Even after its near destruction by the AllSpark, it returned. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.6 cm x 6.8 cm x 2.5 cm The STAR WARS TIE FIGHTER model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. Darth Vader's TIE Fighter is the prototype that was used as the basis for all the terrifyingly effective TIE Fighters and Interceptors that would be developed for future battles. The TIE Fighter has proven its worth in battle, as it is able to withstand many direct hits. Furthermore, the pilots' chances of survival were significantly increased with the addition of a hyperdrive system, which allows the ship to escape from desperate battle situations. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 6.5 cm x 6 cm x 7.3 cm The TIE FIGHTER model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. TIE Fighters are one-man starfighters with a spherical cockpit, hexagonal wings, and two chin-mounted laser cannons. The basic TIE fighter first appeared in A New Hope and is the primary Imperial fighter seen in the Original Trilogy. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 8.8 cm x 6.5 cm x 4.2 cm Box dimensions: 12cm x 17cm Weight with box: 48Gr The USS ENTERPRISE NCC-1701-D model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The NCC-1701-D is a 24th-century starship in the fictional universe of Star Trek and the setting of the television series Star Trek: The Next Generation. It is a Galaxy-class ship and the fifth Federation starship in the Star Trek universe to bear the name Enterprise. For most of its service, the commanding officer of the Enterprise D is Captain Jean-Luc Picard. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 13.2cm x 8.8cm x 2.6cm Material: Metal Recommended age range: 14+ The AVRO LANCASTER BOMBER model kit It's an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. It is a British four-engine heavy bomber used by the RAF in World War II. It became the most successful night bomber of the war, flying 156,000 sorties. The bomber earned additional distinction for carrying the famous "bouncing bomb" from Maintenance for Operation Chastise in attacks on dams in the Ruhr Valley. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 1 Leaf Difficulty Level: Moderate Dimensions: 10cm x 7cm x 5cm Material: Metal Recommended age range: 14+ The SPACE SHUTTLE ATLANTIS model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. It was the fourth shuttle built and the last to fly. She was launched on her maiden voyage on 3 October 1985 and landed for the last time on 12 July 2011 at Cape Kennedy. By the end of its final flight, Atlantis had orbited the Earth 4,848 times, traveling nearly 126 million miles. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.5 cm x 4 cm x 3 cm The T-34 TANK model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 2-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The T-34 tank was a Soviet tank produced between 1940 and 1958. Although its armor and armament were superior to later World War II tanks, it is often considered the most effective, efficient, and influential tank design of World War II.  FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 6.2 cm x 5.8 cm x 5.2 cm The IMPERIAL AT-AT model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. All-Terrain Armored Transport Vehicles, or AT-ATs for short. They first appeared in Empire Strikes Back. AT-ATs are 50 feet tall and resemble giant, four-legged monsters. The head serves as a control center and mount for the walker's weapons. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED