Fascinations Metal Works (126)

Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 9cm x 4.5cm x 5.8cm Material: Metal Recommended age range: 14+ The APOLLO LUNAR ROVER model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. It was affectionately known as the moon buggy. It was used on the Moon in the last three missions of the US Apollo program (15, 16, 17) during 1971 and 1972. Powered by just two silver oxide batteries, Apollo 17 was able to drive for 35.74 km (22.21 mi) across the surface of the Moon. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 11cm x 3.5cm x 9cm Material: Metal Recommended age range: 14+ The GOLDEN HIND model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. The Golden Hind or Hinde was an English galleon best known for its circumnavigation of the globe between 1577 and 1580, captained by Sir Francis Drake. She was originally known as the Pelican, but Drake renamed her mid-voyage in 1578, as he was preparing to enter the Strait of Magellan, calling her the Golden Hind to compliment her skipper, Sir Christopher Hatton, whose coat of arms was a golden hind (a female doe). Hatton was one of the main sponsors of Drake's world voyage. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 1 Leaf Difficulty Level: Moderate Dimensions: 3.8cm x 3.8cm x 8.9cm Material: Metal Recommended age range: 14+ The LEANING TOWER OF PISA model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. The Leaning Tower of Pisa is the bell tower, or freestanding campanile, of the city of Pisa, Italy, known worldwide for its involuntary tilt to one side. It is located behind the Cathedral and is the third oldest structure in Pisa's Cathedral Square (Piazza del Duomo) after the Cathedral and the Baptistery. The tower's tilt began during construction, caused by an inadequate foundation on soil too soft on one side to adequately support the structure's weight. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LATEST UNITS WORLDWIDE Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 15.25cm x 4.3cm x 10.65cm Box dimensions : 13.5cm x 1.5cm x 22cm Weight with box: 120g Recommended age range: 14+ The QUEEN ANNE'S REVENGE SHIP model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with two square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. Queen Anne's Revenge was the name of the flagship of the English pirate known as Blackbeard. He used it for less than a year, but it was an effective tool in his prize-taking. In 1718, Blackbeard ran his ship aground in Beaufort Inlet, Carteret County, North Carolina, in the present-day United States. In late 1996, Intersal, a private contractor working for the state of North Carolina on marine recovery, discovered the remains of a ship that was likely the Queen Anne's Revenge. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item condition: New Code: ICX006 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 8.9cm x 6.6cm x 8.9cm Recommended age range: 14+ The SAINT BASIL'S CATHEDRAL model kit is an incredibly detailed etched model that is great fun and satisfying to put together. It starts with three square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. Saint Basil's Cathedral, commonly known as Saint Basil's Cathedral, is a former church in Red Square in Moscow, Russia. The building, now a museum, is officially known as the Cathedral of the Intercession of the Most Holy Mother of God on the Moat. It was built between 1555 and 1561 by order of Ivan the Terrible and commemorates the capture of Kazan and Astrakhan. A world-famous landmark, it has been the center of the city's growth since the 14th century and was the tallest building in the city until the completion of the Ivan the Great Bell Tower in 1600.  FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Challenging Dimensions: 8.9cm x 8.9cm x 6.35cm Recommended age range: 14+ The Taj Mahal model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with three square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. It is a white marble mausoleum located in Agra, Uttar Pradesh, India. It was built by the Mughal emperor Shah Jahan in memory of his third wife, Mumtaz Mahal. The Taj Mahal is widely recognized as "the jewel of Muslim art in India and one of the universally admired masterpieces of world heritage." FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 10.9 cm x 8.2 cm x 4.5 cm The KLINGON VORCHA model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The Vor'Cha-class strike cruiser is a powerful ship that debuted in the Next Generation episode "Reunion." Its combat function is said to be comparable to that of a heavy cruiser. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 8.8 cm x 6.5 cm x 4.2 cm The USS ENTERPRISE NCC-1701-D model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The Bird of Prey is one of the most common Klingon ships seen in the Star Trek franchise. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 8.8 cm x 6.5 cm x 4.2 cm Box dimensions: 12cm x 17cm Weight with box: 48Gr The USS ENTERPRISE NCC-1701-D model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The NCC-1701-D is a 24th-century starship in the fictional universe of Star Trek and the setting of the television series Star Trek: The Next Generation. It is a Galaxy-class ship and the fifth Federation starship in the Star Trek universe to bear the name Enterprise. For most of its service, the commanding officer of the Enterprise D is Captain Jean-Luc Picard. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 12.7 cm x 6 cm x 6 cm The ENTERPRISE NCC-1701 model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The NCC-1701 was a Federation Constitution-class heavy cruiser that saw service with Starfleet during the mid-to-late 23rd century. Over the course of its career, the Enterprise became the most celebrated starship of its time. The Enterprise was destroyed over the Genesis Planet in 2285 when Kirk activated the ship's self-destruct sequence to prevent the Enterprise from falling into Klingon hands. The most famous captain of the Enterprise was James T. Kirk! FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 6.5 cm x 6 cm x 7.3 cm The TIE FIGHTER model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. TIE Fighters are one-man starfighters with a spherical cockpit, hexagonal wings, and two chin-mounted laser cannons. The basic TIE fighter first appeared in A New Hope and is the primary Imperial fighter seen in the Original Trilogy. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 5 cm x 4.9 cm x 8.6 cm The DESTROYER DROID model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. Destroyer Droids, also known as Droidekas, were used by the Trade Federation during the invasion of the planet Naboo. These droids had shield generators and could curl into a ball to move quickly. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 10.4 cm x 6 cm x 5.9 cm The IMPERIAL STAR DESTROYER model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. Designed to strike awe and terror into the hearts of Rebels, the Imperial Star Destroyer and the rest of the Empire's fleet of starships maintain order in the galaxy through displays of power and ruthless fighting tactics. It is a capital ship. It first appears in the opening seconds of Star Wars and is the flagship of the Imperial fleet. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.6 cm x 6.8 cm x 2.5 cm The STAR WARS TIE FIGHTER model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. Darth Vader's TIE Fighter is the prototype that was used as the basis for all the terrifyingly effective TIE Fighters and Interceptors that would be developed for future battles. The TIE Fighter has proven its worth in battle, as it is able to withstand many direct hits. Furthermore, the pilots' chances of survival were significantly increased with the addition of a hyperdrive system, which allows the ship to escape from desperate battle situations. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 6.2 cm x 5.8 cm x 5.2 cm The IMPERIAL AT-AT model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. All-Terrain Armored Transport Vehicles, or AT-ATs for short. They first appeared in Empire Strikes Back. AT-ATs are 50 feet tall and resemble giant, four-legged monsters. The head serves as a control center and mount for the walker's weapons. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LATEST UNITS WORLDWIDE Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.3 cm x 4.5 cm x 3 cm The Sherman Tank model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The Sherman tank was the main tank used by the United States during World War II. The tank is named after Union General William Tecumseh Sherman. Production exceeded 50,000 units. Only the Soviet T-34 tank was produced in large numbers during World War II. Although it was totally inadequate against the 56-ton German Tiger I and 72-ton Tiger II, mobility, mechanical reliability, and sheer numbers helped offset its strategic disadvantages. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 6cm x 6cm x 5.5cm Material: Metal Recommended age range: 14+ The APOLLO LUNAR MODULE model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. It was a two-part spacecraft used to transport a crew of two from lunar orbit to the lunar surface and back. The descent stage served as a launch pad for the ascent stage and also housed the landing gear, engines, and fuel needed for landing. Six of these spacecraft successfully landed on the Moon between 1969 and 1972. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 12.1cm x 3.5cm x 3.7cm Material: Metal Recommended age range: 14+ The GRAF ZEPPELIN model kit It's an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. It was a hydrogen-filled rigid airship that operated commercially from 1928 to 1937. During that time it made 590 flights and flew over a million miles. The Zeppelin could reach a top speed of 80 mph (70 knots) with its maximum thrust of 2,650 horsepower and had a usable payload of 15,000 kg (33,000 lbs). FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 6cm x 2.9cm x 9.5cm Material: Metal Recommended age range: 14+ The 30 Rockefeller Plaza model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. It was known as the RCA Building until 1988 and is now known as the GE Building. It is also nicknamed 30 Rock and is famous for being the headquarters of the NBC television network. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 8.2cm x 4.2cm x 3.5cm Material: Metal Recommended age range: 14+ The TOWER OF THE AMERICAS model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with a single 4-inch square sheet of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. The Tower of the Americas is a 750-foot observation tower/restaurant on the southeastern edge of downtown San Antonio, Texas, USA. The tower was built as a theme structure for the 1968 World's Fair. It was the tallest observation tower in the United States until 1996, when the Stratosphere Tower in Las Vegas was completed. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 3 Sheets Difficulty Level: Expert Dimensions: 8.2cm x 4.2cm x 3.5cm Material: Metal Recommended age range: 14+ The PARTHENON model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. It is a temple located on the Acropolis of Athens in Greece and dedicated to the maiden goddess Athena, whom the people of Athens considered their patron deity. Construction began in 447 BC when the Athenian Empire was at the height of its power and was completed in 438 BC. The Parthenon is the most recognizable enduring symbol of ancient Greece, Athenian democracy, and Western civilization. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 2.6cm x 2.6cm x 16cm Material: Metal Recommended age range: 14+ The CN TOWER model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. This concrete observation and communications tower in downtown Toronto, Canada, stands at 553 m (1,815 ft). When completed in 1976, it was the tallest free-standing structure in the world. The CN Tower is a symbol of Canadian achievement and was declared one of the Seven Wonders of the Modern World by the American Society of Civil Engineers in 1995. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 11cm x 3.5cm x 9cm Material: Metal Recommended age range: 14+ The UNITED STATES CAPITOL BUILDING model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. Located in Washington, D.C., the Capitol is the meeting place of the United States Congress. It sits atop Capitol Hill, which is at the eastern end of the National Mall. Construction began on September 18, 1793. The Capitol is built in the distinctive American Neoclassical style with a white marble exterior. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 11cm x 3.5cm x 9cm Material: Metal Recommended age range: 14+ The GOLDEN HIND model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. The Golden Hind or Hinde was an English galleon best known for its circumnavigation of the globe between 1577 and 1580, captained by Sir Francis Drake. She was originally known as the Pelican, but Drake renamed her mid-voyage in 1578, as he was preparing to enter the Strait of Magellan, calling her the Golden Hind to compliment her skipper, Sir Christopher Hatton, whose coat of arms was a golden hind (a female doe). Hatton was one of the main sponsors of Drake's world voyage. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 13.7cm x 2.3cm x 5cm Material: Metal Recommended age range: 14+ The BROOKLYN BRIDGE model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required. The Brooklyn Bridge is located in New York City and is one of the oldest suspension bridges in the United States. Completed in 1883, it connects the boroughs of Manhattan and Brooklyn across the East River. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 7.5cm x 3.3cm x 9.1cm Material: Metal Recommended age range: 14+ The Ferris Wheel model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The first modern Ferris wheel was designed and built by George Washington Ferris as a landmark for the 1893 World's Columbian Exposition in Chicago. Later, the term Ferris wheel was used generically for all these structures. As of 2012, the Singapore Flyer at 541 feet tall is the tallest wheel in the world. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

?DISCONTINUED MODEL-LAST UNITS WORLDWIDE Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 12.2cm x 9cm x 2.4cm Material: Metal Recommended age range: 14+ The SPIRIT OF SANT LUIS model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required. The Spirit of Saint Louis was the first airplane to fly solo, nonstop, across the Atlantic. On May 20, 1927, at 7:52 a.m., this custom-built, single-engine, single-seat monoplane piloted by Charles Lindbergh departed Long Island, New York, on its historic flight. After 33.5 hours and 3,600 miles, the plane arrived safely at Le Bourget Field in Paris. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED