Accesorios
Accesorios Para Autos
Adornos Navideños
Apilador
Armable
Asfaltadora & Perfiladora
Autos de Colección
Aviones & Helicópteros
Buses
Cama Baja
Camión & Cargador de Bajo Perfil
Camión Articulado
Camión Cisterna
Camión de bombero
Camión Minero
Camiones de servicio
Camioneta
Camisas
Canguros
Cargador de Orugas
Cargador de Ruedas
Celulares
Containers
Control Remoto
Control Remoto AG
Diorama
Elevadores
Excavadora
Excavadora de Ruedas
Gorra de Tejido
Gorras
Gorras Mujer
Gorras Niños
Grúa de Oruga
Grúa Móvil
Grúa Sobre Orugas Telescópica
Grúa Torre
Juguete
Lego
Lentes de Seguridad
Lentes de Sol
Linterna
Llavero
Locomotora
Mezcladora
Microconstructor
Minicargador
Mochilas
Montacarga
Morral
Motoniveladora
Motores & Generadores
Motos & Motocicletas
Mototrailla
Palas Hidraulicas & Electricas
Peluches
Perforadora
Plataforma
Poleras & Casacas
Polos
Relojes
Retroexcavadora
Rodillo Compactador
Rodillo De Ruedas
Tanques
Tiende Tubos
Tomatodo
Tracto
Tractor Agricola
Tractor de Orugas
Tractor de Ruedas
Tractores Forestales & Equipos Especiales
Trailer
Volquetes
Worker
PRE-ORDER USA
Imperial Shuttle (Buildable)
S/. 76.99
S/. 84.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Moderate
Dimensions: 12.7cm x 6.4cm x 11.1cm
Material: Metal
Recommended age range: 14+
The IMPERIAL SHUTTLE model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
An elegant example that stands out from the typical brutal Imperial engineering, the Lambda-class shuttle is a multipurpose transport used in the Imperial Starfleet. The Empire put the ferry into service for both cargo and passenger service. Even the Empire's elite, such as Darth Vader and Emperor Palpatine, used these shuttles. It has three wings: a stationary central blade and two articulated flanking wings. When in flight, the side wings are deployed for greater stabilization. Upon landing, the wings fold, shrinking the silhouette of the craft. The well-armed vessel has two forward-facing twin laser cannons, two wing-mounted twin cannons, and one rear-facing twin laser cannon. It is equipped with a hyperdrive.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Apollo Lunar Rover (Buildable)
S/. 66.99
S/. 73.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Expert
Dimensions: 9cm x 4.5cm x 5.8cm
Material: Metal
Recommended age range: 14+
The APOLLO LUNAR ROVER model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required.
It was affectionately known as the moon buggy. It was used on the Moon in the last three missions of the US Apollo program (15, 16, 17) during 1971 and 1972. Powered by just two silver oxide batteries, Apollo 17 was able to drive for 35.74 km (22.21 mi) across the surface of the Moon.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
966K Wheel Loader 1:50 Scale (Discontinued Model)
S/. 1,101.99
S/. 1,223.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
DISCONTINUED MODEL - LATEST UNITS WORLDWIDE
Article Status: New
Accessories: No
Brand: Tonkin Replicas
Model: 966K
Scale: 1:50
Vehicle Brand: Caterpillar
Code: TON10003-1
Recommended age range: 14+
Product Dimensions: 16.5cm x 7cm x 7cm
Product weight: 350g
Material: Foundry
Color: Yellow
Authentic model made of die-cast metal. Detailed interior. Rubber tires.
PRE-ORDER USA
Ferrari FXX-K EVO Car Scale 1:18
S/. 264.99
S/. 293.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Recommended age range: 14+
Product Dimensions: 26cm x 12cm x 7cm
Box dimensions: 33.5cm x 16.5cm x 13cm
Product weight: 800g
Weight with box: 1.05Kg
Material: Cast iron
Color: Blue & Black
Authentic model made of die-cast metal. Detailed interior. The doors and hood open. Full function address. Four-wheel suspension.
PRE-ORDER USA
Ford F-150 Raptor Truck 2017 Scale 1:27 (Discontinued Model)
S/. 127.90
S/. 159.90
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
DISCONTINUED MODEL - LATEST UNITS WORLDWIDE
Recommended age range: 14+
Dimensions: Product: 21cm x 7.5cm x 6.5cm
Dimensions: box: 24.5cm x 11cm x 10.5cm
Product weight: 395g
Weight with box: 670g
Material: Cast iron
Color: Blue
Authentic model made of die-cast metal. Rubber tires. The doors open. Detailed interior and exterior.
PRE-ORDER USA
2017 Ford F-150 Raptor Truck 1:24 Scale
S/. 132.90
S/. 165.90
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Recommended age range: 14+
Dimensions: Product: 21cm x 7.5cm x 6.5cm
Dimensions: box: 24.5cm x 11cm x 10.5cm
Product weight: 395g
Weight with box: 670g
Material: Cast iron
Red
Authentic model made of die-cast metal. Rubber tires. The doors open. Detailed interior and exterior.
PRE-ORDER USA
B-17 Flying Fortress (Buildable)
S/. 66.99
S/. 73.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Moderate
Recommended age range: 14+
Dimensions: 14.7 cm x 11.3 cm x 4.3 cm
Box height: 17cm
Case diameter: 12cm
Weight with box: 50Gr
The B-17 Flying Fortress model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with two square sheets of steel and ends in a 3D model; simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required.
It is a 4-engine heavy bomber used in World War II. It was a powerful, high-flying, long-range bomber that was able to defend itself and return home despite extensive battle damage.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Ford F150 2017 Raptor Truck Scale 1:24 (Discontinued Model)
S/. 305.90
S/. 380.90
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
DISCONTINUED MODEL - LATEST UNITS WORLDWIDE
Recommended age range: 14+
Product Dimensions: 23.5cm x 10cm x 8.5cm
Dimensions: box: 28.5cm x 14cm x 12cm
Product weight: 500g
Weight with box: 670g
Material: Cast iron
Gray
Authentic model made of die-cast metal. Rubber tires. The doors open. Detailed interior and exterior.
PRE-ORDER USA
Leaning Tower of Pisa (Buildable)
S/. 66.99
S/. 73.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 1 Leaf
Difficulty Level: Moderate
Dimensions: 3.8cm x 3.8cm x 8.9cm
Material: Metal
Recommended age range: 14+
The LEANING TOWER OF PISA model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
The Leaning Tower of Pisa is the bell tower, or freestanding campanile, of the city of Pisa, Italy, known worldwide for its involuntary tilt to one side. It is located behind the Cathedral and is the third oldest structure in Pisa's Cathedral Square (Piazza del Duomo) after the Cathedral and the Baptistery. The tower's tilt began during construction, caused by an inadequate foundation on soil too soft on one side to adequately support the structure's weight.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
San Basilio Cathedral (Buildable)
S/. 101.99
S/. 112.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Item condition: New
Code: ICX006
Number of Sheets: 2 Sheets
Difficulty Level: Expert
Dimensions: 8.9cm x 6.6cm x 8.9cm
Recommended age range: 14+
The SAINT BASIL'S CATHEDRAL model kit is an incredibly detailed etched model that is great fun and satisfying to put together. It starts with three square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
Saint Basil's Cathedral, commonly known as Saint Basil's Cathedral, is a former church in Red Square in Moscow, Russia. The building, now a museum, is officially known as the Cathedral of the Intercession of the Most Holy Mother of God on the Moat. It was built between 1555 and 1561 by order of Ivan the Terrible and commemorates the capture of Kazan and Astrakhan. A world-famous landmark, it has been the center of the city's growth since the 14th century and was the tallest building in the city until the completion of the Ivan the Great Bell Tower in 1600.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Volvo FH12 Globetrotter Low Bed Scale 1:50 (Discontinued Model)
S/. 299.90
S/. 374.90
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
DISCONTINUED MODEL - LATEST UNITS WORLDWIDE
Recommended age range: 14+
Product Dimensions: 36cm x 5.5cm x 7.5cm
Box dimensions: 40cm x 8.5cm x 13cm
Product weight: 480g
Weight with box: 650g
Material: Cast iron
Color: Black & White
Authentic model made of die-cast metal. Detailed interior, including operator. Rubber tires.
PRE-ORDER USA
Hydraulic Excavator 315 Scale 1:50
S/. 496.99
S/. 551.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Item condition: New
Accessories: Yes
Manufacturer: Diecast Masters
Model: 315
Scale: 1:50
Vehicle brand: Caterpillar
Code: 85957BK
Recommended age range: 14+
Product Dimensions: 15cm x 5cm x 6cm
Box dimensions: 24cm x 12.5cm x 12cm
Product weight: 300g
Weight with box: 755g
Material: Cast iron
Color: Black
Authentic model made of die-cast metal. Detailed interior of the cab, including the operator. Metal tracks. Movable boom, dipper and bucket.
PRE-ORDER USA
Volvo FH4 8x4 Low Bed & Mammoet Container Scale 1:87
S/. 199.99
S/. 221.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Recommended age range: 14+
Product Dimensions: 26.5cm x 3cm x 4.5cm
Box dimensions: 30cm x 4cm x 8cm
Product weight: 165g
Weight with box: 240g
Material: Cast iron
Color: Red, Black & Gray
Authentic model made of die-cast metal and ABS plastic. Rubber tires. Detailed interior and exterior. It has a container.
PRE-ORDER USA
Volvo FH12 Trailer 1:50 Scale (Discontinued Model)
S/. 283.99
S/. 314.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
DISCONTINUED MODEL - LATEST UNITS WORLDWIDE
Recommended age range: 14+
Product Dimensions: 27cm x 5cm x 7.5cm
Box dimensions: 40cm x 8.5cm x 13cm
Product weight: 640g
Weight with box: 775g
Material: Cast iron
Color: Green & White
Authentic model made of die-cast metal. Detailed interior and exterior. Rubber tires.
PRE-ORDER USA
Military Scraper 623G Scale 1:50 (Discontinued Model)
S/. 873.99
S/. 970.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
DISCONTINUED MODEL - LATEST UNITS WORLDWIDE
Recommended age range: 14+
Product Dimensions: 23.5cm x 7cm x 7.5cm
Box dimensions: 37cm x 10cm x 12.5cm
Product weight: 650g
Weight with box: 820g
Material: Cast iron
Color: Green & black
Authentic model made of die-cast metal. Rubber tires. Detailed interior and exterior.
PRE-ORDER USA
Lowboy & Backhoe 420D IT 1:50 Scale (Discontinued Model)
S/. 458.99
S/. 509.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
DISCONTINUED MODEL - LATEST UNITS WORLDWIDE
Recommended age range: 14+
Product Dimensions: 38cm x 5cm x 9.5cm
Box dimensions: 46cm x 9cm x 13cm
Product weight: 750g
Weight with box: 970g
Material: Cast iron
Color: Yellow
Authentic model made of die-cast metal and realistic details. Rubber tires. Detailed interior and exterior.
PRE-ORDER USA
Klingon Vorcha (Buildable)
S/. 76.99
S/. 84.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Expert
Recommended age range: 14+
Dimensions: 10.9 cm x 8.2 cm x 4.5 cm
The KLINGON VORCHA model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required.
The Vor'Cha-class strike cruiser is a powerful ship that debuted in the Next Generation episode "Reunion." Its combat function is said to be comparable to that of a heavy cruiser. FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
USS Enterprise NCC-1701-D (Buildable)
S/. 76.99
S/. 84.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Moderate
Recommended age range: 14+
Dimensions: 8.8 cm x 6.5 cm x 4.2 cm
Box dimensions: 12cm x 17cm
Weight with box: 48Gr
The USS ENTERPRISE NCC-1701-D model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required.
The NCC-1701-D is a 24th-century starship in the fictional universe of Star Trek and the setting of the television series Star Trek: The Next Generation. It is a Galaxy-class ship and the fifth Federation starship in the Star Trek universe to bear the name Enterprise. For most of its service, the commanding officer of the Enterprise D is Captain Jean-Luc Picard.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Enterprise NCC-1701 (Buildable)
S/. 76.99
S/. 84.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Expert
Recommended age range: 14+
Dimensions: 12.7 cm x 6 cm x 6 cm
The ENTERPRISE NCC-1701 model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required.
The NCC-1701 was a Federation Constitution-class heavy cruiser that saw service with Starfleet during the mid-to-late 23rd century. Over the course of its career, the Enterprise became the most celebrated starship of its time. The Enterprise was destroyed over the Genesis Planet in 2285 when Kirk activated the ship's self-destruct sequence to prevent the Enterprise from falling into Klingon hands. The most famous captain of the Enterprise was James T. Kirk!
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
TIE Fighter (Buildable)
S/. 76.99
S/. 84.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Expert
Recommended age range: 14+
Dimensions: 6.5 cm x 6 cm x 7.3 cm
The TIE FIGHTER model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required.
TIE Fighters are one-man starfighters with a spherical cockpit, hexagonal wings, and two chin-mounted laser cannons. The basic TIE fighter first appeared in A New Hope and is the primary Imperial fighter seen in the Original Trilogy.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Destroyer Droid (Buildable)
S/. 76.99
S/. 84.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Expert
Recommended age range: 14+
Dimensions: 5 cm x 4.9 cm x 8.6 cm
The DESTROYER DROID model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
Destroyer Droids, also known as Droidekas, were used by the Trade Federation during the invasion of the planet Naboo. These droids had shield generators and could curl into a ball to move quickly.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Imperial Star Destroyer (Buildable)
S/. 76.99
S/. 84.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Moderate
Recommended age range: 14+
Dimensions: 10.4 cm x 6 cm x 5.9 cm
The IMPERIAL STAR DESTROYER model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
Designed to strike awe and terror into the hearts of Rebels, the Imperial Star Destroyer and the rest of the Empire's fleet of starships maintain order in the galaxy through displays of power and ruthless fighting tactics. It is a capital ship. It first appears in the opening seconds of Star Wars and is the flagship of the Imperial fleet.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Imperial AT-AT (Buildable)
S/. 76.90
S/. 94.90
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Moderate
Recommended age range: 14+
Dimensions: 6.2 cm x 5.8 cm x 5.2 cm
The IMPERIAL AT-AT model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with two 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required.
All-Terrain Armored Transport Vehicles, or AT-ATs for short. They first appeared in Empire Strikes Back. AT-ATs are 50 feet tall and resemble giant, four-legged monsters. The head serves as a control center and mount for the walker's weapons. FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Grand Piano (Buildable)
S/. 66.99
S/. 73.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Moderate
Dimensions: 7.5cm x 5.9cm x 6.8cm
Material: Metal
Recommended age range: 14+
The GRAND PIANO model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
Grand Piano: is a musical instrument played with a keyboard consisting of 52 white keys and 36 black keys covering a range of more than seven octaves. The Grand Piano is designed so that its frame and strings are parallel to the floor with the strings extending away from the keyboard. The piano also includes 3 pedals that are used to change the sound of the instrument in various ways.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Apollo Lunar Module (Buildable)
S/. 66.99
S/. 73.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Expert
Dimensions: 6cm x 6cm x 5.5cm
Material: Metal
Recommended age range: 14+
The APOLLO LUNAR MODULE model kit is an incredibly detailed, etched model that is a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required.
It was a two-part spacecraft used to transport a crew of two from lunar orbit to the lunar surface and back. The descent stage served as a launch pad for the ascent stage and also housed the landing gear, engines, and fuel needed for landing. Six of these spacecraft successfully landed on the Moon between 1969 and 1972.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Battery (Buildable) (Discontinued Model)
S/. 66.99
S/. 73.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
DISCONTINUED MODEL - SOLD OUT WORLDWIDE
Number of Sheets: 2 Sheets
Difficulty Level: Moderate
Dimensions: 8.2cm x 5.5cm x 5.2cm
Material: Metal
Recommended age range: 14+
The DRUM SET model kit is an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
Drum Set is a collection of drums and other percussion instruments configured to be played by a single player. The first recognizable ancestors of modern drumming were born in the vaudeville era.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Praying Mantis (Buildable) (Discontinued Model)
S/. 42.99
S/. 47.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
DISCONTINUED MODEL - OUT OF PRODUCTION
Number of Sheets: 1 Sheet
Difficulty Level: Moderate
Dimensions: 12cm x 9cm x 4cm
Material: Metal
Recommended age range: 14+
The PRAYIMG MANTIS model kit It's an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
The name comes from the Greek word meaning prophet because they appear to be praying when their front legs are together. They are carnivorous and are equipped with sharp spines along their front legs to grab prey. The mantis is a unique insect in that it can rotate its head 180 degrees, has only one ear, and some are large enough to capture hummingbirds.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Avro Lancaster Bomber Aircraft (Buildable)
S/. 42.99
S/. 47.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 1 Sheet
Difficulty Level: Moderate
Dimensions: 13.2cm x 8.8cm x 2.6cm
Material: Metal
Recommended age range: 14+
The AVRO LANCASTER BOMBER model kit It's an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
It is a British four-engine heavy bomber used by the RAF in World War II. It became the most successful night bomber of the war, flying 156,000 sorties. The bomber earned additional distinction for carrying the famous "bouncing bomb" from Maintenance for Operation Chastise in attacks on dams in the Ruhr Valley.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Dragonfly (Buildable)
S/. 42.99
S/. 47.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 1 Sheet
Difficulty Level: Moderate
Dimensions: 10.9cm x 9.2cm x 3cm
Material: Metal
Recommended age range: 14+
The DRAGONFLY model kit It's an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with a 4-inch square sheet of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
It has large, multifaceted eyes, two pairs of strong, transparent wings, and an elongated body. Dragonflies are among the fastest flying insects in the world, capable of reaching speeds of over 40 miles per hour. They are important predators that eat mosquitoes and other small insects such as flies, bees, ants and wasps. They are usually found around swamps, lakes, ponds, streams, and wetlands.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Graf Zeppelin (Buildable)
S/. 66.99
S/. 73.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Moderate
Dimensions: 12.1cm x 3.5cm x 3.7cm
Material: Metal
Recommended age range: 14+
The GRAF ZEPPELIN model kit It's an incredibly detailed etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
It was a hydrogen-filled rigid airship that operated commercially from 1928 to 1937. During that time it made 590 flights and flew over a million miles. The Zeppelin could reach a top speed of 80 mph (70 knots) with its maximum thrust of 2,650 horsepower and had a usable payload of 15,000 kg (33,000 lbs).
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Plaza Rockefeller 30 (Buildable)
S/. 66.99
S/. 73.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 2 Sheets
Difficulty Level: Moderate
Dimensions: 6cm x 2.9cm x 9.5cm
Material: Metal
Recommended age range: 14+
The 30 Rockefeller Plaza model kit is an incredibly detailed, etched model that's a lot of fun and satisfying to put together. It starts with four 4-inch square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the attachment points. No glue or soldering is required.
It was known as the RCA Building until 1988 and is now known as the GE Building. It is also nicknamed 30 Rock and is famous for being the headquarters of the NBC television network.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
PRE-ORDER USA
Tower of the Americas (Buildable)
S/. 42.99
S/. 47.99
📦 Ubicación: EE.UU. · ⏳ 10–15 días hábiles
Number of Sheets: 1 Sheet
Difficulty Level: Moderate
Dimensions: 8.2cm x 4.2cm x 3.5cm
Material: Metal
Recommended age range: 14+
The TOWER OF THE AMERICAS model kit is an incredibly detailed etched model that is a lot of fun and satisfying to put together. It starts with a single 4-inch square sheet of steel and ends with a 3D model. Simply use the easy-to-follow instructions included with the sheet to extract the pieces, bend the tabs, and connect them at the fixing points. No glue or soldering is required.
The Tower of the Americas is a 750-foot observation tower/restaurant on the southeastern edge of downtown San Antonio, Texas, USA. The tower was built as a theme structure for the 1968 World's Fair. It was the tallest observation tower in the United States until 1996, when the Stratosphere Tower in Las Vegas was completed.
FUN TO ASSEMBLE
STEP 1
STEP 2
FILLED
THE BEST GIFT IS HERE
Products of the highest quality 100% originalSHIPPING TO ALL OF PERU AND THE WORLD
We ship to any part of the worldPRODUCTS WITH WARRANTY
We offer you a guarantee of up to 12 monthsWRITE US TO WHATSAPP
We will answer your questions immediately
