Remote Controlled Tamiya Models (9)

Item Condition: New Code: FMW201 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.5cm x 4cm x 3cm The T-34 TANK model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The T-34 tank was a Soviet tank produced between 1940 and 1958. Although its armor and armament were surpassed by later tanks of World War II, it is often considered the most effective, efficient, and influential tank design of the Soviet era. the Second World War.  FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Gens Ace 6-cell, 7.2V, 3000mAh NiMH battery with Tamiya connector. This stick pack is built with quality Sub C size 3000mAh NiMH cells and features a Tamiya connector. These batteries will fit any vehicle that uses a standard rod type battery housing. The recommended charge rate for these batteries is 1C for the best battery life and run time, and we do not recommend that you charge them above 1C (3A max). Specifications: Voltage: 7.2 Cells: 6 Capacity: 3000mAh Dimensions: 139x48x25mm Weight: 360g

Material: CNC machined aluminum Dimensions: L110 * W24 * H20cm Product weight: About 5.5 kg Length: 1080 mm Width: 210 mm Note: Due to its large size, the front part must be disassembled and shipped in 2 stages. Packing box size 60*26*37cm

Wheelbase: 433 mm? 103 mm Tread: 156 mm (front), 138 mm (rear, dual tire) Chassis: Polycarbonate resin and aluminum ladder frame Suspension: front/rear leaf springs Launch angle: (front/rear): 0°/0° Caster angle: (front/rear): 0°/0° Toe angle (front/rear): 0°/0° Shock Absorbers: Front/Rear Aluminum Friction Shock Absorbers Transmission: 2-axle rear-wheel drive Transmission: 3-speed transmission (gear shift operated from transmitter) Gear ratio: (1st gear) 32.49:1, (2nd gear) 17.76:1, (3rd gear) 10.66:1 Differential: 3-Bevel Diff. Engine: Type 540 Tire width: 22 mm (front/rear) Tire diameter: 83 mm (front/rear) Description: The Tamiya King Hauler Black Edition 1/14 semi-trailer kit features a precision-molded tractor-trailer chassis with pre-painted metallic black parts offset by chrome-plated parts such as the front grille, air filters, and more. The rugged ladder-frame chassis is paired with front and rear metal leaf-spring shock absorbers for excellent performance and durability. The front-mounted engine provides power to the rear wheels via a propeller shaft, mirroring the system used on real-life off-road trucks, and utilizes a 3-speed transmission with manually controllable shifting. Realistic lights, sounds and vibrations with the MFC unit sold separately: The separately sold Multifunction Control Unit (MFC) offers light, sound, and vibration control to enhance your RC truck experience. Engine sounds have been digitally recorded from the actual truck and, along with the air horn, gear shifting, and many other realistic sounds, give you the feeling of real driving. Headlights, brake lights, fog lights, hazard lights, and turn signals are also at your fingertips. 6 types of semi-trailers available separately: Six trailer types are currently available, including semi-trailers, tanker trailers, and pole trailers. Add any of them via the coupler on the model to create an exciting combination over a meter long. Required to be purchased separately: 4-Channel Radio Control Transmitter and Receiver Multifunction control unit MFC-01 2 servos 7.2V Battery Pack and Charger This product was added to the catalog on February 27, 2021

TSU-03 Servo x1 Analog servo technology. Control system: pulse width control Operating angle: One side more than 45 degrees Power supply: 4.8-6.0V Current consumption: 8mA (using 6.0V battery) Output torque: 3.5kg-cm (using 6.0V battery) Operating speed: 0.17 sec/ 60 degrees (using 6.0V battery) Dimensions: 40 x 20 x 37mm Weight: 37g Overview This precision servo can be used with many of Tamiya's radio control products.

Overview The semi-trailer light set, when combined with the tractor truck electrical unit set or the multifunction unit, allows the modeler to further enhance the appearance and performance with functional brake and flashing lights. The unit can be easily installed on the semi-trailer without complicated wiring. Power is supplied by the truck's working battery. The set includes a semi-trailer connector cable with bulbs and an internal circuit board connector cable. Easy-to-understand instructions are included. Not compatible with Carsonr trailers.

Overview The Realistic Lights, Sounds, and Vibration Multifunction Control Unit (MFC-01) delivers lights, sounds, and vibrations in combination with R/C truck action for a truly captivating R/C experience. Engine sounds have been digitally recorded from a real truck and, along with the air horn, gear shifting, and many other realistic sounds, let you feel like you're driving the real thing. The unit supports up to twenty LEDs in total of nine different types; headlights, brake lights, and turn signal operation are also available at your fingertips. It features a built-in electronic speed controller function to allow smooth travel at speeds ranging from very low to standard.

Item Type: RC Truck Vehicle brand: Volvo Scale: 1:14 Product Dimensions: 73.5cm x 30.5cm x 19.5cm Product weight: 4.4Kg Material: ABS Plastic & Metal Color: Black Sold separately: Remote control, 4-channel radio, one servo, 7.2-volt battery with compatible charger, and Tamiya TS-Paint. This is a TAMIYA 1:14 scale RC semi-truck assembly kit model of a long rear bed timber truck with a distinctive frame and stakes for hauling logs. The model itself represents the Volvo FH16 Globetrotter, a 16.1-liter, 750-hp turbocharged truck from the Swedish company's flagship FH series that underwent a complete model change in 2012. 1/14 scale RC tractor truck model assembly kit. Length: 735mm, Width: 195mm, Height: 305mm.The ABS plastic body captures the Globetrotter FH16 shape, with photo-etched stainless steel front grille and interior cab details.The stake representations and the rear cab headboard use a durable combination of resin and metal. The 3-speed, assembly-type transmission allows gear shifting via a separately sold 4-channel transmitter.The ladder frame features aluminum side channels with plastic crossbars.Power from the front-mounted engine is delivered to the rear axles via the propeller shaft. A differential gear incorporated into each axle allows for smooth cornering. The highly realistic suspension uses metal springs and friction dampers. The model enjoys easy handling thanks to the die-cast front axles and reinforced resin rear axles.The TR Mighty Tuned (35T) engine provides plenty of power, even when driving under load. Printable papercraft journaling templates available for download!The LED cables on the multifunction control units (MFCs) are not compatible with this model. You'll need to purchase longer LED cables, available separately (items 56549-56551), if you use an MFC.Compatible Optional Parts (TROP) include items 56523, 56531, 56532, 56538, and 56548. Requires: 4-channel radio, One Servo, ESC, 7.2-volt battery with compatible charger, and Tamiya TS-Paint.